HAL CCSD
Microscopic and macroscopic instabilities in finitely strained fiber-reinforced elastomers
Michel, Jean-Claude
Lopez-Pamies, Oscar
Ponte Castañeda, Pedro
Triantafyllidis, Nicolas
Laboratoire de Mécanique et d'Acoustique [Marseille] (LMA ) ; Aix Marseille Université (AMU)-École Centrale de Marseille (ECM)-Centre National de la Recherche Scientifique (CNRS)
State University of New York (SUNY)
Department of Mechanical Engineering and Applied Mechanics (MEAM) ; University of Pennsylvania
Laboratoire de mécanique des solides (LMS) ; École polytechnique (X)-Mines Paris - PSL (École nationale supérieure des mines de Paris) ; Université Paris sciences et lettres (PSL)-Université Paris sciences et lettres (PSL)-Centre National de la Recherche Scientifique (CNRS)
International audience
ISSN: 0022-5096
Journal of the Mechanics and Physics of Solids
Elsevier
hal-00542895
https://polytechnique.hal.science/hal-00542895
https://polytechnique.hal.science/hal-00542895
Journal of the Mechanics and Physics of Solids, 2010, 58 (11), pp.1776-1803. ⟨10.1016/j.jmps.2010.08.006⟩
DOI: 10.1016/j.jmps.2010.08.006
info:eu-repo/semantics/altIdentifier/doi/10.1016/j.jmps.2010.08.006
en
[PHYS.MECA.SOLID]Physics [physics]/Mechanics [physics]/Solid mechanics [physics.class-ph]
[SPI.MECA.SOLID]Engineering Sciences [physics]/Mechanics [physics.med-ph]/Solid mechanics [physics.class-ph]
info:eu-repo/semantics/article
Journal articles
The present work is a detailed study of the connections between microstructural instabilities and their macroscopic manifestations -- as captured through the effective properties -- in finitely strained fiber- reinforced elastomers, subjected to finite, plane-strain deformations normal to the fiber direction. The work, which is a complement to a previous and analogous investigation by the same authors on porous elastomers, (Michel et. al. , 2007), uses the linear comparison, second-order homogenization (S.O.H.) technique, initially developed for random media, to study the onset of failure in periodic fiber-reinforced elastomers and to compare the results to more accurate finite element method (F.E.M.) calculations. The influence of different fiber distributions (random and periodic), initial fiber volume fraction, matrix constitutive law and fiber cross- section on the microscopic buckling (for periodic microgeometries) and macroscopic loss of ellipticity (for all microgeometries) is investigated in detail. In addition, constraints to the principal solution due to fiber/matrix interface decohesion, matrix cavitation and fiber contact are also addressed. It is found that both microscopic and macroscopic instabilities can occur for periodic microstructures, due to a symmetry breaking in the periodic arrangement of the fibers. On the other hand, no instabilities are found for the case of random microstructures with circular section fibers, while only macroscopic instabilities are found for the case of elliptical section fibers, due to a symmetry breaking in their orientation.
2010